XiNCOM XC-DPG602 Manuel d'utilisateur télécharger pdf (Page 19)

Advanced PPPoE

Figure 8. Advanced PPPoE

Settings - Advanced PPPoE

WAN Port

PPPoE Session

Select the desired Port and Session, then click the “Select” button. The data for the selected Port/Session will then be displayed in the

WAN IP Account section.

WAN IP Account

• User Name – Enter the PPPoE user name assigned by your ISP.

• Password – Enter the PPPoE password assigned by your ISP.

• Verify Password – Re-enter the PPPoE password assigned by your ISP.

• IP Address – If you have a ﬁxed IP address, enter it here. Otherwise, this ﬁeld should be left at 0.0.0.0.

• Host Name – This ﬁeld is used by a Host to uniquely associate an access concentrator to a particular Host request.

Action

Use the “Connect” and “Disconnect” buttons to establish or terminate a connection on this session.

Connection Status

This displays the current connection status for each session.

The screen is required in order to use multiple

PPPoE sessions on the same WAN port.

It can also be used to manually connect or

disconnect a PPPoE session.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Pas de commentaire

XiNCOM XC-DPG602 Manuel d'utilisateur Page 19